|
| |
|
|
        |
 |
|
Auto Air Colors™ are premium water-based
custom paints developed by a leading manufacturer
who has over twenty-five years experience in waterborne
coatings technologies.
|
|
Graphic colors intended for base colors and large
applications where complete coverage is desired.
Best applied over a 4000 Sealer. Most colors applied over
4001 Sealer White for a brighter value. Apply Deep Black and darker
colors over 4002 Sealer Dark. Not intended for fine, detailed artwork
with a small tip-sized airbrush. Contains fillers for opacity which
prevent fine atomization at reduced pressures.
Use as a color-keyed base for 4500 Series Sparklescent
Color or 4300 Series Pearlescent Color. Semi-Opaque base reduces the
amount of material required for a pearlized finish as the pearl color
covers quicker in fewer coats than when used as a base color.
Color-keying a base with a more expensive pearl mid-coat not only saves
material, but it also reduces curing times.
Excess coats of a pearl color applied as a base color
for coverage require over a white sealer require a longer drying period
than a few light coats over a Semi-Opaque base color. On average,
Semi-opaque Colors dry faster than do 4300 and 4500 Series Colors due to
the higher solids content in the Semi-Opaque Colors.
Intended for application with a spray gun or large
tip-sized airbrush.
Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.4mm or larger
Reduce: Spray-gun: @ 10% per volume with 4011 Flash Reducer
Airbrush: @ 30% per volume or more with 4011 Flash Reducer
| click on photos or item number for
pricing / purchase |
Graphic colors for airbrushing murals, fades and
graphics over a base color. Transparent Colors work well with smaller tip-sized
airbrushes for finely detailed artwork. Best
applied over a base color or 4000 Series Sealer.
Works well with all tip-sized airbrushes. Transparent Colors
lack solids present in other colors, making the Transparent Colors ideal for use
with large & small tip-sized airbrushes as the viscosity is quickly lowered when
reduced for proper atomization at lower PSI settings.
Over-reduce in greater amounts for use with airbrush tip
sizes of 0.2mm and smaller.
Reduction can far exceed our recommendations without
affecting the paint’s adhesion due to minimal amount of paint applied with a
small tip-sized airbrush.
Mix with 4001 Sealer White to create a color-keyed sealer
base for improved coverage of base color. Transparent Colors can be used as
toners to other Auto Air Colors for custom blends.
Colors are translucent after curing.
Transparent Colors will cover over underlying images to some
extent. For a completely transparent finish, use the 4600 Series Candies.
Transparent Colors can be used as base colors. Apply in
multiple, light coats when doing so to avoid runs.
A deep finish is created when used as a base color due to
color’s hue shifting from light to dark over direct & side-views.
Mainly intended for use with an airbrush.
Transparent Colors’ low viscosity may not be suited for use
with larger spray guns.
Mini-Spray Gun:0.8 - 1.0mm tip
Airbrush: All sizes, reduce as needed
Reduce: Spray-gun:@ 5 - 10% per volume with 4011 Flash Reducer
Airbrush:@ 10 - 25% per volume with large tip sizes and up to / greater
than 100% per volume with small tip sized airbrushes
Transparent Colors
Trans.
T.
|
