Applied as a mid-coat color over a black base. Best applied over 4220 Deep Black.

Excellent coverage. 2 quarts is often enough material to paint a large vehicle.

Color-shift not pronounced until top-coat clear applied.

Color-key with select 4500 Series Sparklescent Colors for perfect, true ghosted graphics which are readily visible on direct-views and disappear into the base coat on side-cast views. Refer to Sparklescent Chart on page XX for color keys.

Applied over different base colors, Gem Colors create very unique and beautiful pearl finishes.

Examples: Gem Ruby over 4356 Iridescent Electric Blue base, Gem Ruby over 4205 Flame Orange Base, Gem Ruby over 4350 Iridescent Brite Yellow Base.

4401 Gem Sapphire: royal blue to nothing shift (black base/base color has shift on side-cast)
4402 Gem Turquoise: green to blue shift
4403 Gem Jade: green to gold shift
4404 Gem Ruby: gold to red shift

Intended for application with a spray gun or large tip-sized airbrush.

Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.4mm or larger
Reduce: Spray-gun: @ 10% per volume with 4011 Flash Reducer
Airbrush: @ 20% per volume or more with 4011 Flash Reducer

Accent pearl-flakes with a slight color shift from the respective color to nothing on the side-cast view.

Apply over any base color for slight pearl accents.

Use sparingly. A little of this color goes a long way. For example, one quart will be enough for an entire mid-coat on a full size SUV. One or two dust coats is all that is required. If too much material is applied, the color turns to a pastel and the effect is lost.

Colors are concentrated. Extending color by mixing with 4008 Transparent Base adds more base, which allows for an easier application when painting large areas.

Hi-Lite Blue over 4330 & 4331 metallic White is a killer accent, especially over contoured surfaces such as flared fenders. Use very sparingly for this to work well.

Hi-Lite Gold is a great accent pearl to most colors, especially 4301 Pearl White. Use very sparingly.
A test panel is strongly recommended to determine finish and amount of Hi-Lite Color required for accent. Hi-Lite’s effects not visible until after top-coat clear is applied.

Applied over 4002 Sealer Dark or 4220 Deep Black base.

Intended for application with a spray gun or large tip-sized airbrush.

Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.4mm or larger
Reduce: Spray-gun: @ 10% per volume with 4011 Flash Reducer
Airbrush: @ 30% per volume or more with 4011 Flash Reducer